## [2.2.6] - 2025/08/07
### ADDED
- [INT] OXINST brand and icon
- [EXT] Added option for changing the timeout of firmware update from "Tools"→"Settings"
### CHANGED
- [INT] Changelog update, use the 'changelogNEW.md' file
- [EXT] Improvement of settings windows
### FIXED
- [EXT] Timeout correctly stops the firmware update procedure
- [INT] Don't allow CT-BOX firmware update: CT-BOX not selectable for firmware update

## [2.2.5] - 2025/02/25
### FIXED
- [EXT] TetrAMM firmware update not in Recovery Mode
  - the device can now be update without the need to put the device in Recovery Mode. The TetrAMM should be in the same subnet of the Host PC used for updating the firmware

### CHANGED
- [EXT] Moved "Enable Manual IP" option
  - The "Enable Manual IP" option is now accessible from "Tools"->"Setting" and it can be used to update Power Supplies in Recovery Mode
- [INT] Replying timeout increased from 60s to 120s

### ADDED
- [INT] ATTOCUBE brand and icon
- [INT] KIUTRA brand and icon
- [INT] ELETTRA brand and icon
- [INT] MICROSENSE brand
- [EXT] Updated brands and icons


## [2.2.4] - 2024/07/01
### ADDED
- [INT] New Device: STM-32 Tester
- [EXT] New Device: BatReg2


## [2.2.3] - 2024/06/10
### FIXED
- [INT] Replying timeout increased from 30s to 60s
- [EXT] Minor Bug Fix


## [2.2.2] - 2024/06/01
### CHANGED
- [EXT] Table Advanced Config
- [INT] Timeout to check if the unit is replying instead of maximum cycles


## [2.2.1] - 2024/02/02
### ADDED
- [INT] Export firmware upgrade log to file
- [EXT] Open power supplies gui in your default browser


## [2.2.0] - 2024/01/01
### FIXED
- [EXT] Power supplies icon in Recovery Mode
- [INT] Increase the maximum number of firmware lines
- [INT] When a new firmware is selected, the progress bar is reset
- [INT] When a new firmware is selected, the log console is reset
- [INT] The network configurations of the devices in recovery mode are not editable

### CHANGED
- [INT] Updates are performed in a different thread
- [INT] Renamed the 'Name' field and the 'Family' field to 'Group'


## [2.1.4] - 2023/11/01
### FIXED
- [EXT] Check responses to the broadcast message 10 times every 10ms
- [INT] MAC Address in uppercase
- [INT] If DHCP is enabled the IP Address, the Subnet Mask and the MAC Address must be non-editable

### CHANGED
- [INT] Name of the filters


## [2.1.3] - 2023/09/01
### ADDED
- [EXT] Drag & Drop Firmware (Linux)
- [INT] Memory of the last directory


## [2.1.2] - 2023/08/01
### FIXED
- [EXT] Regul8or icon
- [INT] Device Types
- [INT] Device firmware update

### ADDED
- [EXT] Fast-Bi-1K5 devices
- [EXT] Fast-PS+ devices

### CHANGED
- [INT] Device Filter


## [2.1.1] - 2023/04/01
### FIXED
- [EXT] Manual IP of the dev to be updated

### ADDED
- [EXT] EnBOX icon
- [EXT] Regul8or icon
- [EXT] ZUP icon
- [EXT] AMC icon

### CHANGED
- [INT] Get CT-BOX Module ID


## [2.1.0] - 2023/03/10
### FIXED
- [EXT] Minor bugs


## [2.0.5] - 2023/03/01
### FIXED
- [INT] Erase memory DSP2808
- [EXT] Beamline scan


## [2.0.4] - 2023/02/10
### FIXED
- [EXT] maintenancetool Path
- [INT] device update

### ADDED
- [INT] Manual IP of the dev to be updated

### CHANGED
- [INT] Save network configuration procedure
- [INT] Linux install script


## [2.0.3] - 2023/02/10
### FIXED
- [INT] Do not change pages while a firmware update is in progress
- [INT] The software crashes if two devices are selected for firmware update
- [INT] xPort response (Windows)

### ADDED
- [INT] Network Configurations Check
- [EXT] Online installer
- [EXT] Check for updates


## [2.0.2] - 2023/02/01
### FIXED
- [INT] CT-BOX serial number
- [INT] Beamline serial number
- [INT] Beamline filter

### ADDED
- [INT] Check Box to select the devices to update


## [2.0.1] - 2023/01/01
### ADDED
- [INT] Qt installer framework
- [EXT] Change Easy-Driver IP
- [INT] MS2 response

### CHANGED
- [INT] Light theme


## [2.0.0] - 2022/11/01
### ADDED
- [INT] First Release