## [1.5.1] - 2026/04/02
### ADDED
- MRM:STOP command
- STOP_RAMP bit in FDB command

### CHANGED
- MWI command: now it stops the ramp if a ramp is active

### FIXED
- MON command
- MOFF command


## [1.5.0] - 2020/12/17
### FIXED
- ADC reads at low temperatures


## [1.4.0] - 2017/10/11
### FIXED
- DC-link under-voltage check (now it is performed on the calibrated value)


## [1.3.9] - 2017/10/05
### ADDED
- Compatibility with custom 0220 model (2A - 20V)


## [1.3.8] - 2017/07/18
### FIXED
- Polarity issue


## [1.3.7] - 2016/09/12
### ADDED
- MSR (Module Slew Rate) function 
- MWSR and MRSR function (read and write slew rate). This value is not stored into the EEPROM

### CHANGED
- FDB, MWI and MRM are sync with the last set value

### FIXED
- MRID replies with the Echo
- MWI and MRM function reply with NAK when the module is in OFF
- Resolution problem


## [1.3.6] - 2016/07/13
### ADDED
- Compatibility with custom model 0112


## [1.3.5] - 2016/06/10
### FIXED
- Fan speed bug


## [1.3.4] - 2016/06/10
### ADDED
- 0520 model compatibility


## [1.3.3] - 2016/06/07
### CHANGED
- Thresholds for fan speed regulation


## [1.3.2] - 2016/06/05
### FIXED
- Fan speed regulation


## [1.3.1] - 2016/06/02
### FIXED
- Minor bugs


## [1.3.0] - 2016/06/01
### CHANGED
- Firmware release enumeration extended to three numbers


## [1.2.0] - 2016/04/13
### ADDED
- Display IP and MAC information


## [1.1.0] - 2016/03/31
### CHANGED
- Cell 29 is no more password protected


## [1.0.0] - 2016/03/31
### ADDED
- First firmware release