Changelog

• Version 2.1.9 Released

  bug_report

  Fixed

  • Fixed an occasional boot issue on older boards after upgrading to version 2.x.x;
  • Fixed Alternate mode save issue.

• Version 2.1.8 Released

  new_releases

  Added

  • Product Identification Code for the CAEN portal (Cell #114);
  • Added Freeze CC and CV possibility.

• Version 2.1.7 Released

  new_releases

  Added

  • Added model NGPS 30-300.

• Version 2.1.6 Released

  new_releases

  Added

  • System Update Utilities v2.12;
  • Recovery image to v3.0.7.
  bug_report

  Fixed

  • Memory leak due to larger number of waveforms loaded.

• Version 2.1.5 Released

  bug_report

  Fixed

  • Display freeze on boot;
  • Initialization of waveform prescaler to 1 at startup.

• Version 2.1.4 Released

  bug_report

  Fixed

  • Removed prescaler max limit to allow user to generate very long waveforms.

• Version 2.1.3 Released

  new_releases

  Added

  • Added quit of autotuning when external fault is present;
  • Read option to waveform.
  bug_report

  Fixed

  • Fixed wave DMA bug - infinite periods bug;
  • Fixed issue with autotuning and MOFF command.

• Version 2.1.2 Released

  bug_report

  Fixed

  • Solved waveform multiple load;
  • Solved bouncing on the local display control menu.

• Version 2.1.1 Released

  new_releases

  Added

  • Added internal functions;
  • Added Autotuning for Superconducting Magnets;
  • Added NTP commands.
  bug_report

  Fixed

  • Solved issue with Autotuning check on steady state;
  • Solved issue with oscilloscope trigger;
  • Slave number visualization in case of parallel configuration;
  • Subnet mask issue fixed;
  • Removed font external dependencies from Web interface.

• Version 2.1.0 Released

  new_releases

  Added

  • Added UPFREQ command;
  • Added SETPS command (only on 1K5);
  • Added Quench option for all models.

• Version 2.0.13 Released

  bug_report

  Fixed

  • Fixed content of cell memory #120 if not initialized;
  • Fixed WAVE:TRIGGER:POINTS command.

• Version 2.0.12 Released

• Version 2.0.11 Released

  new_releases

  Added

  • NGPS 300-18 model;
  • Updated params of NGPS 300-36 and 400-25.
  bug_report

  Fixed

  • Fixed parallel bug (issue present only in ver. 2.0.9 and 2.0.10).

• Version 2.0.10 Released

  bug_report

  Fixed

  • NGPS 200-60 max power;
  • PID limiter (issue present only in ver. 2.0.9).

• Version 2.0.9 Released

  new_releases

  Added

  • NGPS 150-70, 200-60;
  • Auto tuning;
  • New recovery image 2.0.4 with updated system update server.
  bug_report

  Fixed

  • Trigger type from web interface;
  • Crowbar reset when in test and calibration section.

• Version 2.0.8 Released

  bug_report

  Fixed

  • Reset of interlock.

• Version 2.0.7 Released

  new_releases

  Added

  • Internal status IV register.

• Version 2.0.6 Released

  new_releases

  Added

  • Modbus update mode, regulation mode, over current, over voltage, temperature and set voltage.
  bug_report

  Fixed

  • NGPS 1000-10 gain;
  • TRIG capability for FAST-PS calibration.

• Version 2.0.5 Released

  new_releases

  Added

  • Added models: NGPS 100-150, 125-120, 300-30, 170-60, 105-100.
  bug_report

  Fixed

  • Dissipative fault in case of parallel mode.

• Version 2.0.4 Released

  bug_report

  Fixed

  • Slew rate at startup;
  • Web interface interlocks test black screen.

• Version 2.0.3 Released

  new_releases

  Added

  • OCEM serial and part number (RESERVED);
  • Insulation test for NGPS (RESERVED);
  • Swap file.
  • recovery 2.0.2;
  • Full cleanup during firmware upgrade.
  bug_report

  Fixed

  • AIN, trigger and DDCT default test status (RESERVED);
  • lcd-ctrl crash when NETWORK tab is selected;
  • lcd-ctrl initial focus in NETWORK tab;
  • lcd-ctrl black screen at startup when the ethernet network cable is disconnected and DHCP mode is selected;
  • Full cleanup during firmware upgrade;
  • nodejs crash when web interface is used to upgrade the firmware;
  • Slew rate ramp resolution.

• Version 2.0.2 Released

  sync

  Changed

  • Finalize model is not destroyed when a new psm is selected (RESERVED).

• Version 2.0.1 Released

  bug_report

  Fixed

  • Dissipative fault for the slaves in case of parallel mode;
  • Local mode from lcd-ctrl.

• Version 2.0.0 Released

  new_releases

  Added

  • Gate feature;
  • OSC expander ON/OFF;
  • Cell 57 to enable/disable EPICS at startup;
  • Forced MREBOOT command;
  • Snapshots;
  • Ordering and options code;
  • NGPS 62.5-180;
  • Interface PSM model selector (RESERVED);
  • Auto generation of serial number (RESERVED);
  • PSM and json exporter from report (RESERVED);
  • Data usage, to enable it set cell 58 (RESERVED);
  • Agilent multichannel support during calibration (RESERVED);
  • Limit min/max current output during calibration and check (RESERVED);
  • NGPS-C10 200-50, NGPS-C10 350-25, NGPS 1000-10;
  • Modbus TCP at port 502 (RESERVED);
  • Cell 59 to enable/disable Modbus TCP (RESERVED);
  • Manuals;
  • Remote IP debugger (RESERVED);
  • GOTTY shell (RESERVED);
  • Cell 54 to enable/disable dissipative support for FAST-PS-1K5;
  • MFT and MFT:? command.
  bug_report

  Fixed

  • MRAUX for FAST-PS-1K5;
  • WAVE:N_PERIODS: and WAVE:POINTS: when in fault or OFF mode;
  • Loop and upmode state after reboot in case of web interface;
  • Network info on lcd-ctrl;
  • Web interface height in case of 2K and 4K monitors;
  • Web interface Firefox compatibility;
  • MAC address at startup;
  • lcd-ctrl crash when in local mode, under Control tab, in ON and a fault occurred;
  • cpid compatibility with old format;
  • High CPU usage when upgrading firmware under particular settings;
  • PSMs sync;
  • Drop-down menu scroll in the web interface;
  • lcd-ctrl ERR message when in SFP mode;
  • Temperature fault in case of parallel mode;
  • Calibration set point EPSILON error (RESERVED);
  • Calibration status when not available (RESERVED).

• Version 1.5.30 Released

  new_releases

  Added

  • Over current and over voltage;
  • New firmware upgrade procedure for the next major update 2.0.0;
  • Recovery image 2.0.0 (it is upgraded when the new upgrade procedure is started 1.5.30 -> 2.0.0).

• Version 1.5.29 Released

  sync

  Changed

  • Range of crowbar test (RESERVED).

• Version 1.5.28 Released

  bug_report

  Fixed

  • Polarity inverter update time;
  • NGPS in parallel mode.

• Version 1.5.27 Released

  new_releases

  Added

  • Linear current generator to calibrate the current for monopolar models (RESERVED);
  • Fast interface for FAST-PS-1K5 and NGPS.
  bug_report

  Fixed

  • Web interface serial number visualization under Test and Calibration (RESERVED);
  • Web interface slew rate visualization.
  sync

  Changed

  • Web interface analog input calibration settling time (RESERVED).

• Version 1.5.26 Released

  new_releases

  Added

  • Stop of calibration if clear event occurs (RESERVED);
  • SFP readback for FAST-PS;
  • OSC export (RESERVED);
  • Capabilities selector under Test and Calibration (RESERVED).
  bug_report

  Fixed

  • Web interface indicator bars around 0 for monopolar models.
  sync

  Changed

  • Web interface scheduler to boost commands rate;
  • AIN calibration with settling time (RESERVED).

• Version 1.5.25 Released

  new_releases

  Added

  • Test and calibration section (RESERVED);
  • Reports manager in web interface;
  • TIMER command, it is stopped after the first fault with a resolution of 1 ms. Can be reset with MRESET;
  • Message fault description in web interface;
  • Oscilloscope expander in web interface;
  • PID selector in web interface;
  • DHCP.
  bug_report

  Fixed

  • Multiple messages when the web interface is reloaded from the same tab;
  • lcd-ctrl error codes;
  • Waveform stop value;
  • Web interface disconnect event when the web browser is forced to close;
  • IP memory optimization issue;
  • Slew rates in PsParams for lcd-ctrl;
  • UDP hangs when commands are received in sequence in a short time.
  sync

  Changed

  • Minimum number of points for waveform from 100 to 5.
  delete

  Removed

  • Removed memory Cells 120, 121 and 122.

• Version 1.5.24 Released

• Version 1.5.23 Released

  new_releases

  Added

  • FAST-PS 2516.
  bug_report

  Fixed

  • Web interface wrong value of earth leakage current in some cases;
  • TFT shift.

• Version 1.5.22 Released

• Version 1.5.21 Released

  new_releases

  Added

  • MPLIMITS.
  bug_report

  Fixed

  • EPICS freezes due to MLIMITS command.
  delete

  Removed

  • MLIMITS power limits.

• Version 1.5.20 Released

  new_releases

  Added

  • Debug mode;
  • Oscilloscope;
  • Web interface indicators about PID limits;
  • PID architectures under web interface.
  bug_report

  Fixed

  • Privileges for NTP and EPICS sections;
  • Web interface PID settings.
  delete

  Removed

  • Parallel tab from lcd-ctrl in case of FAST-PS.

• Version 1.5.19 Released

  bug_report

  Fixed

  • Temperature faults for the following modules:
  • FAST-PS-1K5 30-50
  • FAST-PS-1K5 15-100
  • FAST-PS-1K5 10-100
  • FAST-PS-1K5 1-15

• Version 1.5.18 Released

  bug_report

  Fixed

  • Visualization of faults in case of a parallel system;
  • Real-time visualization of faults;
  • Overpower in case of parallel mode;
  • Wait For OFF when there is not any load;
  • Fixed update time of polarity inverter state machine.
  delete

  Removed

  • visual-js web browser cache to be notified about updates.

• Version 1.5.17 Released

  new_releases

  Added

  • FFT magnitude and phase spectrums;
  • NTP sync and commands.
  bug_report

  Fixed

  • Frequency and period validators for waveform editor;
  • Oscilloscope freezes when web interface is not disconnected properly.
  sync

  Changed

  • Password reset.

• Version 1.5.16 Released

  sync

  Changed

  • Quench is disabled when in ramp or waveform mode.
  delete

  Removed

  • SETDUTYMODE.

• Version 1.5.15 Released

  new_releases

  Added

  • MLCMDS, MRGD commands;
  • visual-js web application to replace Visual_PS;
  • Wait for OFF;
  • UDP server on port 10001;
  • Socket.IO on port 10002;
  • #NAK:37. UDP buffer overflow;
  • #NAK:38. WAIT FOR OFF;
  • Cell 56 to enable/disable detailed help.
  bug_report

  Fixed

  • #NAK:21;
  • lcd crash issue, black screen.
  sync

  Changed

  • #NAK contains description of error;
  • EPICS restore/save commands do not restart IOC if EPICS:RESTART is not called;
  • PASSWORD command accepts also USER level password;
  • Polarity inverter does not set the magnetic relay if set point is 0;
  • Overpower also with negative power.

• Version 1.5.14 Released

  bug_report

  Fixed

  • Default gateway.

• Version 1.5.13 Released

  bug_report

  Fixed

  • NGPS 600-20 current calibration offset.

• Version 1.5.12 Released

  new_releases

  Added

  • NGPS 600-20.
  bug_report

  Fixed

  • Set float mode at startup.

• Version 1.5.11 Released

  sync

  Changed

  • FF to SUPER-ADMIN.

• Version 1.5.10 Released

  new_releases

  Added

  • New SFP IPs for FAST-PS;
  • MRD command;
  • NGPS 250-30, NGPS 300-30;
  • SETPSW and RESETPSW commands.
  bug_report

  Fixed

  • SETFLOAT mode command;
  • lcd-ctrl set point value when user closes the tab;
  • EPICS commands parser;
  • EPICS ON/OFF status when it is changed by remote MON/MOFF commands.
  sync

  Changed

  • lcd-ctrl Control tab is enabled also when AIN mode is selected;
  • PMODE command can be used only with ADMIN/SUPER-ADMIN user;
  • Cell 35, from 40 to 50 and 60 to 69 are protected by ADMIN privileges.