Command Reference Manual
Contents:
1. Communication interface
1.1. Ethernet interface
1.2. Command Syntax
1.2.1. Read commands
1.2.2. Write commands
1.3. Communication Examples
1.3.1. Python Example
1.3.2. Putty Example
2. Commands
2.1. Common Commands
2.1.1. VER Command
2.1.2. ID Command
2.1.3. LOOP Command
2.1.4. UPMODE Command
2.1.5. FLOATMODE Command
2.1.6. OUT Command
2.1.7. SET Command
2.1.8. GET Command
2.1.9. REG Command
2.1.10. LIMITS Command
2.1.11. TEMP Command
2.1.12. UPFREQ Command
2.1.13. INTERLOCK Command
2.1.14. SWITCH Command
2.2. Memory Related Commands
2.2.1. MEM Command
2.2.2. PASSWORD Command
2.3. Advanced Commands
2.3.1. TRIGGER Command
2.3.2. WAVE Command
3. Internal Memory
4. Power Supply Finite State Machine
5. Internal Registers
5.1. Status Register
5.2. Fault register
6. Optional Boards
6.1. Available Optional Boards
6.1.1. FB1K5OPT0001
6.2. Overview of Optional boards Functionalities
7. Document Revision
Command Reference Manual
2.
Commands
2.3.
Advanced Commands
2.3.
Advanced Commands
In this section are described the advanced commands, such as trigger and waveform.
Contents:
2.3.1. TRIGGER Command
2.3.2. WAVE Command