2.1.14. SWITCH Command
The SWITCH command allows to enable or disable the switches present on the module.
Up to now, only the Persistent Switch is present on the module (additional switches could be added in the future).
The Persistent Switch is a switch present on the rear of the power unit and can be used in superconducting magnets applications.
Command Format:
R/W |
Command |
Response |
|---|---|---|
R |
SWITCH:PERSISTENT:? |
#SWITCH:PERSISTENT:<ps_status> |
W |
SWITCH:PERSISTENT:<ps_status> |
#AK / #NAK |
Parameter(s):
<ps_status> |
Description |
|---|---|
ENABLE |
Enable the persistent switch |
DISABLE |
Disable the persistent switch |
See also
More detailed information regarding the persistent switch can be found in the User’s Manual.
Example(s):
SWITCH:PERSISTENT:ENABLE
#AK
SWITCH:PERSISTENT:?
#SWITCH:PERSISTENT:ENABLE
SWITCH:PERSISTENT:DISABLE
#AK