1.1. Ethernet interface
The control interface is based on ASCII commands over the TCP or UDP protocol on the port 10001.
The device default Ethernet parameters are the following:
Parameter |
Factory value |
|---|---|
IP |
192.168.0.10 |
Subnet mask |
255.255.255.0 |
Gateway |
192.168.0.1 |
DHCP |
Disabled |
The Ethernet configuration can be changed upon the customer needs using the local interface menu.
Tip
The Ethernet Configuration can be changed, but it is not possible to modify the communication protocol port, which remains 10001.