6.2. Fault Register

The Fault Register indicates the unit’s fault register. To read it, see the REG Command.

Bit(s)	Name	Fault Type	Description
[0]	Temperature Fault	Soft	Over-temperature fault - see Internal Memory id:110-111
[1]	DC-Link Fault	Hard	DC-Link fault
[2]	Input OVC	Hard	Input Over-Current fault
[3]	Over-Power	Soft	Over-power fault
[7:4]	Reserved	-	-
[8]	DCCT Error	Hard	DCCT Error
[9]	Reserved	-	-
[10]	Output Relay Fault	Hard	Output Relay fault
[12:11]	Reserved	-	-
[13]	Output OVC	Hard	Output Over-Current Fault - see Internal Memory id: 100
[14]	Output OVV	Hard	Output Over-Voltage Fault - see Internal Memory id: 101
[15]	Reserved	-	-
[16]	External Interlock #1	Soft [1]	External Interlock #1 Fault - see INTERLOCK Command
[17]	External Interlock #2	Soft [1]	External Interlock #2 Fault - see INTERLOCK Command
[18]	External Interlock #3	Soft [1]	External Interlock #3 Fault - see INTERLOCK Command
[19]	External Interlock #4	Soft [1]	External Interlock #4 Fault - see INTERLOCK Command
[25:20]	Reserved	-	-
[26]	Thermocouple Fault	Soft	Thermocouple Fault - see Internal Memory id: 112-114
[27]	Fan(s) Fault	Soft	Fan(s) Fault
[31:28]	Reserved	-	-

[1] (1,2,3,4)

The default Fault Type is set to Soft Fault, it’s possible to change it (see INTERLOCK Command)

See also

• For a detailed description of the faults, please refer to the User’s Manual