CT-BOX Command Reference Manual
1.0.0

Table of Contents

  • Welcome to the CT-BOX Command Reference Manual
    • The CT-BOX Measuring System
    • CT-BOX Versions
    • Scope of this Manual
  • Communication Interface
    • Physical Interfaces
      • Ethernet Interface
      • USB Interface
      • RS-232 Interface
    • Command Syntax
      • Replies
      • Read Commands
      • Write Commands
    • Modes of Operation
      • OSCILLOSCOPE (OSC) Mode
      • DATA-LOGGER (DLOG) Mode
      • DIGITAL-MULTIMETER (DMM) Mode
        • DMM:DC
        • DMM:ACDC
        • DMM:AC
      • Comparison Between the Three Modes
      • Commands per Mode
    • Data Representation
      • OSCILLOSCOPE Mode
      • Status Code
      • DATA-LOGGER Mode
      • DIGITAL-MULTIMETER Mode
    • Communication Examples
      • Python Example (DLOG mode, TCP)
      • Python Example (OSC mode, UDP data stream)
      • Python Example (DMM mode, TCP)
      • Terminal Example
  • Commands
    • Mode and Acquisition Commands
      • MODE Command
      • ACQ Command
      • PRINT Command
    • Reading Commands
      • GET Command
      • GETA Command
      • GETT Command
    • Output Data Rate and Acquisition Settings
      • TS Command
      • FREQ Command
      • DMM Command
      • ACQT Command
    • Measurement Setup Commands
      • PTURNS Command
      • OFFSET Command
    • Alarm and Trigger Commands
      • ALARM Command
        • Threshold Configuration
        • Alarm Behaviour
      • TRG Command
        • Trigger Input (DLOG and OSC modes)
        • Trigger GATE (DMM mode only)
        • Trigger Output (DLOG-OSC modes)
    • SD Card Commands
      • SD Command
        • SD Card Reset
        • File Naming
        • SD Data Management
        • Errors
      • SAVE Command
        • File Format
    • Real-Time Clock Commands
      • DATE Command
      • TIME Command
    • Network Commands
      • IP Command
      • MASK Command
      • GATE Command
      • PORT Command
    • Device Information and Reset Commands
      • VER Command
      • CTBOX Command
      • DCCT Command
      • HWRESET Command
    • Status and Error Commands
      • STATUS Command
      • ERR Command
    • Calibration Commands (Password Protected)
      • PASSWORD Command
      • SCALE Command
      • GAIN Command
    • Command Table Summary
      • Mode and Acquisition
      • Reading
      • Output Data Rate and Acquisition Settings
      • Measurement Setup
      • Alarm and Trigger
      • SD Card
      • Real-Time Clock
      • Network
      • Device Information and Reset
      • Status and Errors
      • Calibration (Password Protected)
  • Internal Registers
    • Status Register
      • MODE Setting Bits (#13 & #17)
      • ACQT Setting Bits (#19 – #18)
      • TRG Setting Bits (#24, #25 & #29)
      • DMM Setting Bits (#27 – #28)
    • Error Register
  • Appendix
    • List of the Error Codes
  • Document Revision
CT-BOX Command Reference Manual
  • Appendix

Appendix

  • List of the Error Codes
Previous Next

© Copyright 2026, ELS Instruments srl.

Built with Sphinx using a theme provided by Read the Docs.