STATUS Command
Applies to: ALL modes (general purpose).
The CT-BOX has an internal status register that shows the actual status and configuration of the instrument. This is a read-only register.
Command Format:
R/W |
Command |
Response |
Description |
|---|---|---|---|
R |
|
|
Read the internal status register (ASCII hexadecimal) |
The full bit-by-bit description of the register is given in Status Register.
Example(s):
The value 0X00110001 indicates that the ACQ status is enabled (bit #1 is
1), the mode of operation is data-logger (bit #17 is 1 and bit #13 is 0) and the
printing is enabled (bit #21 is 1):
STATUS:?
0X00110001