IP Command

Applies to: ALL modes (general purpose).

The IP address of the CT-BOX can be changed with the IP command.

Command Format:

R/W

Command

Response

Description

R

IP:?

<ip_address>

Read the actual IP address

W

IP:<ip_address>

ACK / NAK:x

Set a new IP address

Parameter(s):

Name

Type

Description

<ip_address>

string

IP address in ASCII dotted-decimal format

Important

The new IP address takes effect after a CT-BOX reset (see HWRESET).

The factory-default IP address is 192.168.0.10; see Physical Interfaces.

Example(s):

IP:?
192.168.1.10

IP:192.168.0.25
ACK